Sponsor

September 25, 2022

Furniture Makers

We Speak Furniture

STL225: Just use the plywood already!

https://www.finewoodworking.com/2020/09/25/stl-225-just-use-the-plywood-already



Question 1: 


From Scott:
I’ve been making stuff for as long as I can remember.  I work as an electrician and I feel as though I have a good sense of detail and craftsmanship.  I’ve been woodworking for about a year, mostly on pine and poplar as I’m budget conscious.  I’m getting 2- 1.5×10 ft 8/4 live edge boards of walnut for 20$.  And don’t want to waste them.  When do I step up to higher end wood??


Question 2:


From Matt:
After many hours of battling with my wife I have found a design I think we both can live with.  My wife gave a little ground and is willing to let me build the bed, and nights stands shown in Michael Cullen’s Contemporary Arts and Crafts Bed article.  


There are however two obstacles we need to overcome. 


1) Katie LOVES the nightstands shown in the article photos. I have done a bit of digging but unfortunately I can’t find plans for these night stands. Hopefully there is something out there you can refer me to that will at least get me going in the right direction. If not I can probably cobble something together. I just hate the idea of making a mistake and wasting walnut at $9.50 bf. 


2) The Bed is primarily made from veneered panels.


I understand that sheet goods allow more flexibility in design because they are far more stable, but I kinda hate them.  I know it’s stupid, but I can’t help it.  Is there a construction method that I could use that would not dramatically change the look of the headboard, and footboard?  I think that I could get away just a typical panel glue up but wouldn’t have the same control over the grain pattern.  I live in an area that has pretty dramatic swings in humidity so wood movement could be a problem.  Do these panels need to be treated any different than a table top?




Updated design combines solid walnut with veneered panels




Housed tenons deliver strength, and tapers create a refined appearance


Anissa Kapsales’s wall-unit features mitered cases combined with a unique hanging system for versatile storage



Replay Join FWW contributing editor Christian Becksvoort for our webinar on wood movement.









Segment: Potpourri 


Barry – Favorite tool: Hide glue




Bottled version is strong and easy to use




The traditional glue pot disappeared from woodshops and trade schools soon after World War I when synthetic adhesives took over, leaving later generations of woodworkers to learn this secret of…



Ben – Using hot-melt glue to flush up a tablesaw throat plate


Anissa – Smooth Move: Forgetting to put styles in before installing a face frame


Question 3:


From Jesse:
Please ramble about how cool getting into lutherie has been. What have been some of your favorite resources for learning lutherie stuff? Any particular books or VHS collections?




Good kits make great guitars and offer plenty of real woodworking




If you’ve always wanted to build your own guitar but feared the specialty tools and techniques, consider a kit.



FWW Index page – Our favorite resource for finding esoteric articles on the website.


Tomy Hovington on YouTube


Ted Woodford on YouTube


Making an Archtop Guitar Paperback by Robert Benedetto – Decent book but you couldn’t possibly build a guitar using just this book


Question 4:  


From Clay:
I’ve been getting into woodworking for the past year. I’ve built up a small shop in my garage with a table saw, miter saw, sanders and routers, and a drill press. 


My wife wants me to build us a new farmhouse style trestle table. The base will be made up of 4×4 center legs with 1” thick X-braces. I have never cut a mortise and tenon, I don’t have the budget for a domino, and I don’t want to build a table that will crash to the ground with a thanksgiving feast on it! I’ve attached a picture of the style I’m going for, and I’m mostly concerned about how to attach the X brace pieces to the center legs. I have a doweling jig, but I don’t know what size I should use, and will that be strong enough? Using biscuits doesn’t seem like that would provide enough strength, but maybe I’m wrong.




Tom McLaughlin builds a comfortable, contemporary take on the backyard classic




An easy-to-make jig that uses a plunge router with a guide bushing




7 simple jigs make it easy to rout mortises, slots, holes, and more



Listener Comments:


From Mike:


Love the show! I feel compelled to write to you because, just moments ago, I experienced my first ever kickback event. Yikes! In fact, it happened while listening to episode #220, not long after a lengthy discussion on kickback in response to a listener question and Barry’s comment about needing to respect the “weird physics” of a table saw. Now I have egg on my face, but luckily no lasting injuries. I think the initial impact occurred on my hip right where my belt is so there were several layers of material to cushion.


I consider myself super cautious at the table saw and have never done anything this stupid. The small 12″ x 3.5″ board I had just ripped got hung up mid-cut because the throat plate had slipped a little below the height of the table. I wiggled it through safely, then decided to use the edge of the just-cut board to run along the throat plate to get it to bump at the table (to verify that that was the problem), and somehow managed to let go of the board, dropping it onto the blade WHICH I HAD LEFT RUNNING. Yes. I realize how ridiculous this sounds from someone who just described themselves as super cautious at the table saw. I was definitely not giving 100% attention to the task at hand (which was another thing Ben discussed in that episode). For my own good, I will henceforth reserve listening to Shop Talk Live only while driving, sitting quietly, or during hand work. Thanks for reminding us that we all need reminders on safety, even when we think we are super cautious


Mike


Recommendations: 


Anissa – You’re wrong about podcast


Ben – Ear Hustle podcast


Barry via Mike Korsak – Winds of Change podcast




Every two weeks, a team of Fine Woodworking staffers answers questions from readers on Shop Talk Live, Fine Woodworking‘s biweekly podcast. Send your woodworking questions to [email protected] for consideration in the regular broadcast! Our continued existence relies upon listener support. So if you enjoy the show, be sure to leave us a five-star rating and maybe even a nice comment on our iTunes page.




Sign up for eletters today and get the latest techniques and how-to from Fine Woodworking, plus special offers.







Get woodworking tips, expert advice and special offers in your inbox



×